Default page

Edit File: trigger_wl3253.test

--echo #
--echo # WL#3253: multiple triggers per table
--echo #

SET @binlog_format_saved = @@binlog_format;
SET binlog_format=ROW;

--echo #
--echo # Test 1.
--echo # Check that the sequence of triggers for the same combination 
--echo # of event type/action type can be created for a table
--echo # and is fired consequently in the order of its creation
--echo # during statement execution.
--echo # In this test we check BEFORE triggers.
--echo #

CREATE TABLE t1 (a INT);
CREATE TABLE t2 (a INT, b INT AUTO_INCREMENT PRIMARY KEY);

CREATE TRIGGER tr1_bi BEFORE INSERT ON t1 FOR EACH ROW INSERT INTO t2 (a) VALUES (NEW.a);
CREATE TRIGGER tr2_bi BEFORE INSERT ON t1 FOR EACH ROW INSERT INTO t2 (a) VALUES (NEW.a + 100);

INSERT INTO t1 VALUES (1);

SELECT * FROM t2 ORDER BY b;

DROP TABLE t2;
DROP TABLE t1;

--echo #
--echo # Test 2.
--echo # Check that the sequence of triggers for the same combination 
--echo # of event type/action type can be created for a table
--echo # and is fired consequently in the order of its creation
--echo # during statement execution.
--echo # In this test we check AFTER triggers.
--echo #

CREATE TABLE t1 (a INT);
CREATE TABLE t2 (a INT, b INT AUTO_INCREMENT PRIMARY KEY);

CREATE TRIGGER tr1_bi AFTER INSERT ON t1 FOR EACH ROW INSERT INTO t2 (a) VALUES (NEW.a);
CREATE TRIGGER tr2_bi AFTER INSERT ON t1 FOR EACH ROW INSERT INTO t2 (a) VALUES (NEW.a + 100);

INSERT INTO t1 VALUES (1);

SELECT * FROM t2 ORDER BY b;

DROP TABLE t2;
DROP TABLE t1;

--echo #
--echo # Test 3.
--echo # Check that the sequences of triggers for the different event types
--echo # can be created for a table and are fired consequently
--echo # in the order of its creation during statement execution.
--echo #

CREATE TABLE t1 (a INT);
CREATE TABLE t2 (a INT, b INT AUTO_INCREMENT PRIMARY KEY);

CREATE TRIGGER tr1_bi BEFORE INSERT ON t1 FOR EACH ROW INSERT INTO t2 (a) VALUES (NEW.a);
CREATE TRIGGER tr2_bi BEFORE INSERT ON t1 FOR EACH ROW INSERT INTO t2 (a) VALUES (NEW.a + 100);

CREATE TRIGGER tr1_bu BEFORE UPDATE ON t1 FOR EACH ROW INSERT INTO t2 (a) VALUES (NEW.a);
CREATE TRIGGER tr2_bu BEFORE UPDATE ON t1 FOR EACH ROW INSERT INTO t2 (a) VALUES (NEW.a + 300);

INSERT INTO t1 VALUES (1);

SELECT * FROM t2 ORDER BY b;

UPDATE t1 SET a = 5;

SELECT * FROM t2 ORDER BY b;

DROP TABLE t2;
DROP TABLE t1;

--echo #
--echo # Test 4.
--echo # Check that every new created trigger has unique action_order value
--echo # started from 1 and NOT NULL value for creation timestamp.
--echo #

CREATE TABLE t1 (a INT);

SET TIMESTAMP=UNIX_TIMESTAMP('2013-01-31 09:00:00');
CREATE TRIGGER tr1_bi BEFORE INSERT ON t1 FOR EACH ROW SET @a:=1;
SET TIMESTAMP=UNIX_TIMESTAMP('2013-01-31 09:00:01');
CREATE TRIGGER tr2_bi BEFORE INSERT ON t1 FOR EACH ROW SET @a:=2;

SELECT trigger_name, created, action_order FROM information_schema.triggers WHERE trigger_schema='test';

DROP TABLE t1;
SET TIMESTAMP=DEFAULT;

--echo #
--echo # Test 5.
--echo # Check that action_order attribute isn't shown 
--echo # in the output of SHOW TRIGGERS and SHOW CREATE TRIGGER
--echo #

CREATE TABLE t1 (a INT);
CREATE TRIGGER tr1_bi BEFORE INSERT ON t1 FOR EACH ROW SET @a:=1;

--replace_column 6 #
SHOW TRIGGERS;

--replace_column 17 #
SELECT * FROM INFORMATION_SCHEMA.TRIGGERS WHERE trigger_schema = 'test';

--replace_column 7 #
SHOW CREATE TRIGGER tr1_bi;

DROP TABLE t1;

--echo #
--echo # Test 6.
--echo # Check that action_order attribute is reused when trigger 
--echo # are recreated.
--echo #

CREATE TABLE t1 (a INT);
CREATE TRIGGER tr1_bi BEFORE INSERT ON t1 FOR EACH ROW SET @a:=1;

SELECT trigger_name, action_order FROM information_schema.triggers WHERE trigger_schema='test';

DROP TRIGGER tr1_bi;

CREATE TRIGGER tr1_bi BEFORE INSERT ON t1 FOR EACH ROW SET @a:=2;

SELECT trigger_name, action_order FROM information_schema.triggers WHERE trigger_schema='test';

DROP TABLE t1;

--echo #
--echo # Test 7.
--echo # Check that it is possible to create several triggers with
--echo # the same value for creation timestamp.
--echo #

CREATE TABLE t1 (a INT);

SET TIMESTAMP=UNIX_TIMESTAMP('2013-01-31 09:00:01');
CREATE TRIGGER tr1_bi BEFORE INSERT ON t1 FOR EACH ROW SET @a:=1;
CREATE TRIGGER tr2_bi BEFORE INSERT ON t1 FOR EACH ROW SET @a:=2;

SELECT trigger_name, created, action_order FROM information_schema.triggers WHERE trigger_schema='test';

DROP TABLE t1;
SET TIMESTAMP=DEFAULT;

--echo #
--echo # Test 8.
--echo # Check that SHOW CREATE TRIGGER outputs the CREATED attribute
--echo # and it is not NULL
--echo #

CREATE TABLE t1 (a INT);

SET TIMESTAMP=UNIX_TIMESTAMP('2013-01-31 09:00:01');
CREATE TRIGGER tr1_bi BEFORE INSERT ON t1 FOR EACH ROW SET @a:=1;
SHOW CREATE TRIGGER tr1_bi;

DROP TABLE t1;
SET TIMESTAMP=DEFAULT;

--echo #
--echo # Test 9.
--echo # Check that SHOW TRIGGERS outputs the CREATED attribute
--echo # and it is not NULL.
--echo #

CREATE TABLE t1 (a INT);

SET TIMESTAMP=UNIX_TIMESTAMP('2013-01-31 09:00:01');

CREATE TRIGGER tr1_bi BEFORE INSERT ON t1 FOR EACH ROW SET @a:=1;

SHOW TRIGGERS;

SELECT * FROM INFORMATION_SCHEMA.TRIGGERS WHERE trigger_schema = 'test';

DROP TABLE t1;

SET TIMESTAMP=DEFAULT;

--echo #
--echo # Test 10.
--echo # Check that FOLLOWS clause is supported and works correctly.
--echo #

CREATE TABLE t1 (a INT);
CREATE TABLE t2 (a INT, b INT AUTO_INCREMENT PRIMARY KEY);

CREATE TRIGGER tr1_bi BEFORE INSERT ON t1 FOR EACH ROW INSERT INTO t2 (a) VALUES (NEW.a + 100);
CREATE TRIGGER tr3_bi BEFORE INSERT ON t1 FOR EACH ROW INSERT INTO t2 (a) VALUES (NEW.a + 300);
CREATE TRIGGER tr2_bi BEFORE INSERT ON t1 FOR EACH ROW FOLLOWS tr1_bi INSERT INTO t2 (a) VALUES (NEW.a + 200);

SELECT trigger_name, action_order FROM information_schema.triggers WHERE trigger_schema='test';

INSERT INTO t1 VALUES (1);
SELECT * FROM t2 ORDER BY b;

DROP TABLE t2;
DROP TABLE t1;

--echo #
--echo # Test 11.
--echo # Check that PRECEDES clause is supported and works correctly.
--echo #

CREATE TABLE t1 (a INT);
CREATE TABLE t2 (a INT, b INT AUTO_INCREMENT PRIMARY KEY);

CREATE TRIGGER tr1_bi BEFORE INSERT ON t1 FOR EACH ROW INSERT INTO t2 (a) VALUES (NEW.a + 100);
CREATE TRIGGER tr3_bi BEFORE INSERT ON t1 FOR EACH ROW INSERT INTO t2 (a) VALUES (NEW.a + 300);
CREATE TRIGGER tr2_bi BEFORE INSERT ON t1 FOR EACH ROW PRECEDES tr3_bi INSERT INTO t2 (a) VALUES (NEW.a + 200);

SELECT trigger_name, action_order FROM information_schema.triggers WHERE trigger_schema='test';

INSERT INTO t1 VALUES (1);
SELECT * FROM t2 ORDER BY b;

DROP TABLE t2;
DROP TABLE t1;

--echo #
--echo # Test 12.
--echo # Check that the PRECEDES works properly for the 1st trigger in the chain.
--echo #

CREATE TABLE t1 (a INT);
CREATE TABLE t2 (a INT, b INT AUTO_INCREMENT PRIMARY KEY);

CREATE TRIGGER tr1_bi BEFORE INSERT ON t1 FOR EACH ROW INSERT INTO t2 (a) VALUES (NEW.a + 100);
CREATE TRIGGER tr0_bi BEFORE INSERT ON t1 FOR EACH ROW PRECEDES tr1_bi INSERT INTO t2 (a) VALUES (NEW.a);

SELECT trigger_name, action_order FROM information_schema.triggers WHERE trigger_schema='test';

INSERT INTO t1 VALUES (1);
SELECT * FROM t2 ORDER BY b;

DROP TABLE t2;
DROP TABLE t1;

--echo #
--echo # Test 13.
--echo # Check that error is reported if the FOLLOWS clause references to
--echo # non-existing trigger
--echo #

CREATE TABLE t1 (a INT);

CREATE TRIGGER tr1_bi BEFORE INSERT ON t1 FOR EACH ROW SET @a:=1;
CREATE TRIGGER tr3_bi BEFORE INSERT ON t1 FOR EACH ROW SET @a:=3;

--error ER_REFERENCED_TRG_DOES_NOT_EXIST
CREATE TRIGGER tr2_bi BEFORE INSERT ON t1 FOR EACH ROW FOLLOWS tr0_bi SET @a:=2;

SELECT trigger_name, action_order FROM information_schema.triggers WHERE trigger_schema='test';

DROP TABLE t1;

--echo #
--echo # Test 14.
--echo # Check that error is reported if the PRECEDES clause references to
--echo # non-existing trigger
--echo #

CREATE TABLE t1 (a INT);

CREATE TRIGGER tr1_bi BEFORE INSERT ON t1 FOR EACH ROW SET @a:=1;
CREATE TRIGGER tr3_bi BEFORE INSERT ON t1 FOR EACH ROW SET @a:=3;

--error ER_REFERENCED_TRG_DOES_NOT_EXIST
CREATE TRIGGER tr2_bi BEFORE INSERT ON t1 FOR EACH ROW PRECEDES tr0_bi SET @a:=2;

SELECT trigger_name, action_order FROM information_schema.triggers WHERE trigger_schema='test';

DROP TABLE t1;

--echo #
--echo # Test 15.
--echo # Check that action_order value is independent for each type of event
--echo # (INSERT/UPDATE/DELETE)
--echo #

CREATE TABLE t1 (a INT);

CREATE TRIGGER tr1_bi BEFORE INSERT ON t1 FOR EACH ROW SET @a:=1;
CREATE TRIGGER tr2_bi BEFORE INSERT ON t1 FOR EACH ROW SET @a:=2;
CREATE TRIGGER tr1_bu BEFORE UPDATE ON t1 FOR EACH ROW SET @a:=3;

SELECT trigger_name, action_order FROM information_schema.triggers WHERE trigger_schema='test';

CREATE TRIGGER tr3_bi BEFORE INSERT ON t1 FOR EACH ROW FOLLOWS tr2_bi SET @a:=3;
CREATE TRIGGER tr2_bu BEFORE UPDATE ON t1 FOR EACH ROW FOLLOWS tr1_bu SET @a:=3;

SELECT trigger_name, action_order FROM information_schema.triggers WHERE trigger_schema='test';

DROP TABLE t1;

--echo #
--echo # Test 16.
--echo # Check that the trigger in the clause FOLLOWS/PRECEDES can refences
--echo # only to the trigger for the same ACTION/TIMINMG
--echo #

CREATE TABLE t1 (a INT);
CREATE TRIGGER tr1_bi BEFORE INSERT ON t1 FOR EACH ROW SET @a:=1;
CREATE TRIGGER tr1_bu BEFORE UPDATE ON t1 FOR EACH ROW SET @a:=3;

--error ER_REFERENCED_TRG_DOES_NOT_EXIST
CREATE TRIGGER tr2_bu BEFORE UPDATE ON t1 FOR EACH ROW FOLLOWS tr1_bi SET @a:=3;

--error ER_REFERENCED_TRG_DOES_NOT_EXIST
CREATE TRIGGER tr2_au AFTER UPDATE ON t1 FOR EACH ROW FOLLOWS tr1_bi SET @a:=3;

--error ER_REFERENCED_TRG_DOES_NOT_EXIST
CREATE TRIGGER tr1_au AFTER UPDATE ON t1 FOR EACH ROW FOLLOWS tr1_bu SET @a:=3;

--error ER_REFERENCED_TRG_DOES_NOT_EXIST
CREATE TRIGGER tr1_ai AFTER INSERT ON t1 FOR EACH ROW FOLLOWS tr1_bi SET @a:=3;

--replace_column 6 #
SHOW TRIGGERS;

--replace_column 17 #
SELECT * FROM INFORMATION_SCHEMA.TRIGGERS WHERE trigger_schema = 'test';

DROP TABLE t1;

# Binlog is required
--source include/have_log_bin.inc

--echo #
--echo # Test 17. Check that table's triggers are dumped correctly.
--echo #
CREATE TABLE t1 (a INT);
CREATE TRIGGER tr1_bi BEFORE INSERT ON t1 FOR EACH ROW SET @a:=1;
CREATE TRIGGER tr2_bi BEFORE INSERT ON t1 FOR EACH ROW SET @a:=2;
CREATE TRIGGER tr1_bu BEFORE UPDATE ON t1 FOR EACH ROW SET @a:=3;

# dump tables and triggers
--exec $MYSQL_DUMP --compact test

DROP TABLE t1;

--echo #
--echo # Test 18. Check that table's triggers are dumped in right order
--echo #          taking into account the PRECEDES/FOLLOWS clauses.
--echo #

CREATE TABLE t1 (a INT);
CREATE TRIGGER tr1_bi BEFORE INSERT ON t1 FOR EACH ROW SET @a:=1;
CREATE TRIGGER tr2_bi BEFORE INSERT ON t1 FOR EACH ROW SET @a:=2;
CREATE TRIGGER tr0_bi BEFORE INSERT ON t1 FOR EACH ROW PRECEDES tr1_bi SET @a:=0;
CREATE TRIGGER tr1_1_bi BEFORE INSERT ON t1 FOR EACH ROW FOLLOWS tr1_bi SET @a:=0;

--echo # Expected order of triggers in the dump is: tr0_bi, tr1_bi, tr1_1_bi, tr2_i.
# dump tables and triggers
--exec $MYSQL_DUMP --compact test

DROP TABLE t1;

--echo #
--echo # Test 19. Check that table's triggers are dumped correctly in xml.
--echo #

CREATE TABLE t1 (a INT);
SET TIMESTAMP=UNIX_TIMESTAMP('2013-01-31 09:00:00');
CREATE TRIGGER tr1_bi BEFORE INSERT ON t1 FOR EACH ROW SET @a:=1;
CREATE TRIGGER tr2_bi BEFORE INSERT ON t1 FOR EACH ROW SET @a:=2;
CREATE TRIGGER tr1_bu BEFORE UPDATE ON t1 FOR EACH ROW SET @a:=3;
SET TIMESTAMP=DEFAULT;

# dump tables and triggers
--exec $MYSQL_DUMP --compact --no-create-info --xml test

DROP TABLE t1;

--echo #
--echo # Test 20. Check that the statement CHECK TABLE FOR UPGRADE outputs
--echo #          the warnings for triggers created by a server without support for wl3253.
--echo #

CREATE TABLE t1 (a INT);

let $MYSQLD_DATADIR=`SELECT @@datadir`;
--write_file $MYSQLD_DATADIR/test/t1.TRG
TYPE=TRIGGERS
triggers='CREATE DEFINER=`root`@`localhost` TRIGGER tr1_bi BEFORE INSERT ON t1 FOR EACH ROW SET @a:=1' 'CREATE DEFINER=`root`@`localhost` TRIGGER tr1_ai AFTER INSERT ON t1 FOR EACH ROW SET @a:=2'
sql_modes=1073741824 1073741824
definers='root@localhost' 'root@localhost'
client_cs_names='latin1' 'latin1'
connection_cl_names='latin1_swedish_ci' 'latin1_swedish_ci'
db_cl_names='latin1_swedish_ci' 'latin1_swedish_ci'
EOF

--write_file $MYSQLD_DATADIR/test/tr1_bi.TRN
TYPE=TRIGGERNAME
trigger_table=t1
EOF

--write_file $MYSQLD_DATADIR/test/tr1_ai.TRN
TYPE=TRIGGERNAME
trigger_table=t1
EOF

FLUSH TABLE t1;

CHECK TABLE t1 FOR UPGRADE;

SHOW TRIGGERS;

SELECT * FROM INFORMATION_SCHEMA.TRIGGERS WHERE trigger_schema = 'test';

SHOW CREATE TRIGGER tr1_bi;
SHOW CREATE TRIGGER tr1_ai;

DROP TABLE t1;

SET binlog_format=@binlog_format_saved;

--echo # End of tests.
--echo #