Default page

View File Name : rpl_binlog_format_errors.test

# ==== Purpose ====
# The purpose of this script is to test that binary logging returns an error
# when its format is incompatible with the statement to be logged and to verify
# the correctness of the error message.
#
# ==== Requirements ====
# For the conditions 1 to 7 listed in the comments section of method
# decide_logging_format() verify that binary logging returns the proper error or
# warning.
#
# R1. When both row-incapable and statement-incapable storage engines are
#     involved then binary logging returns error
#     `ER_BINLOG_ROW_ENGINE_AND_STMT_ENGINE`.
# R2. When binlog_format = ROW and the SQL statement contains a table stored in
#     a engine limited to statement-logging then binary logging returns error
#      `ER_BINLOG_ROW_MODE_AND_STMT_ENGINE`.
# R3. When binlog_format = ROW and a row is injected in a engine limited to
#     statement-logging then binary_log returns error
#     `ER_BINLOG_ROW_INJECTION_AND_STMT_ENGINE`.
# R4. When binlog_format = MIXED, the SQL statement is unsafe and the storage
#     engine is limited to statement-logging then binary logs returns error
#     `ER_BINLOG_UNSAFE_AND_STMT_ENGINE`.
# R5. When binlog_format = STATEMENT and the SQL statement contains a table
#     stored in a engine limited to row-logging then binary log returns error
#     `ER_BINLOG_STMT_MODE_AND_ROW_ENGINE`.
# R6. When binlog_format = STATEMENT and a row is injected then binary logging
#     returns error `ER_BINLOG_ROW_INJECTION_AND_STMT_MODE`.
# R7. When binlog_format = STATEMENT and the SQL statement is unsafe then a
#     warning is returned.
#
# ==== Implementation ====
#
# TC1. Verify that when both row-incapable and statement-incapable storage
# engines are involved in a SQL statement then binary logging returns the
# error `ER_BINLOG_ROW_ENGINE_AND_STMT_ENGINE`.
# ------------------------------------------------------------------
# With binlog_format = ROW :
# 1) Create a trigger which inserts data on a row-only table upon insertion of
#    data in statement-only table.
# 2) Try to insert data in the statement-only table.
# 3) Verify that error `ER_BINLOG_ROW_ENGINE_AND_STMT_ENGINE` is returned.
# 4) Verify that no data was inserted in the statement-only table.
# 5) Verify that no data was inserted in the row-only table.
#
# TC2. Verify that when binlog_format = ROW and the SQL statement contains a
#      table stored in a engine limited to statement-logging then binary logging
#      returns the error `ER_BINLOG_ROW_MODE_AND_STMT_ENGINE`.
# ------------------------------------------------------------------
# With binlog_format = ROW :
#
# 1) Try to insert data in a statement-only table.
# 2) Verify that `ER_BINLOG_ROW_MODE_AND_STMT_ENGINE` is returned.
# 3) Verify that no data was inserted in the statement-only table.
#
# TC3. Verify that when binlog_format = ROW and the SQL statement modifies data
#      of a table stored on the slave server in a engine limited to
#      statement-logging then binary logging returns the error
#      `ER_BINLOG_ROW_INJECTION_AND_STMT_ENGINE`.
# ------------------------------------------------------------------
# With binlog_format = ROW :
# 1) On the master server insert data in a table which is stored in the slave as
#    statement-only.
# 2) On the slave server verify that error
#    `ER_BINLOG_ROW_INJECTION_AND_STMT_ENGINE` is returned.
# 3) On the slave server verify that no data was inserted in the
#    statement-only table.
#
# TC4. Verify that when binlog_format = ROW and a row is injected in a table
#      stored in a engine limited to statement-logging then binary logging
#      returns the error
#      `ER_BINLOG_ROW_INJECTION_AND_STMT_ENGINE`.
# ------------------------------------------------------------------
# With binlog_format = ROW :
# 1) Execute a BINLOG statement which inserts data in a
#    statement-only table.
# 2) Verify that error `ER_BINLOG_ROW_INJECTION_AND_STMT_ENGINE` is returned.
# 3) Verify that no data was inserted in the statement-only
#    table.
#
# TC5. Verify that when binlog_format = MIXED, the SQL statement is unsafe and
#      the storage engine is limited to statement-logging then binary logging
#      returns the error `ER_BINLOG_UNSAFE_AND_STMT_ENGINE`.
# ------------------------------------------------------------------
# With binlog_format = MIXED :
# 1) Try to execute an unsafe statement on a statement-only table.
# 2) Verify that error `ER_BINLOG_UNSAFE_AND_STMT_ENGINE` is returned.
# 3) Verify that no data was inserted in the statement-only table.
#
# TC6. Verify that when binlog_format = MIXED and a multi-unsafe statement is
#      executed in a table stored in a engine limited to statement-logging then
#      binary logging returns the error `ER_BINLOG_UNSAFE_AND_STMT_ENGINE`.
# ------------------------------------------------------------------
# With binlog_format = MIXED :
# 1) Try to execute a multi-unsafe statement in a statement-only table.
# 2) Verify that error `ER_BINLOG_UNSAFE_AND_STMT_ENGINE` is returned.
# 3) Verify that no data was inserted in the statement-only table.
#
# TC7. Verify that when binlog_format = STATEMENT and the SQL statement modifies
#      a table stored in INNODB engine as row-only then binary logging returns
#      the error `ER_BINLOG_STMT_MODE_AND_ROW_ENGINE`.
# ------------------------------------------------------------------
# With binlog_format = STATEMENT :
# 1) Try to insert data on table stored in INNODB as row-only.
# 2) Verify that error `ER_BINLOG_STMT_MODE_AND_ROW_ENGINE` is returned.
# 3) Verify that no data was inserted in the table.
#
# TC8. Verify that when binlog_format = STATEMENT and the default database is
#      ignored by binary logging no error is returned if the SQL statement
#      modifies a table stored in INNODB as row-only.
# ------------------------------------------------------------------
# With binlog_format = STATEMENT :
# 1) Set the default database to a database which is ignored by binary logging.
# 2) Insert data in the table stored in INNODB as row-only.
# 3) Verify that data was inserted.
#
# TC9. Verify that when binlog_format = STATEMENT and the SQL statement modifies
#      a table stored in a row-only engine then binary logging returns the error
#      `ER_BINLOG_STMT_MODE_AND_ROW_ENGINE`.
# ------------------------------------------------------------------
# With binlog_format = STATEMENT:
# 1) Try to insert data in a table stored in a row-only engine.
# 2) Verify that error `ER_BINLOG_STMT_MODE_AND_ROW_ENGINE` is returned.
# 3) Verify that no data was inserted in the row-only table.
#
# TC10. Verify that when binlog_format = STATEMENT and the default database is
#       ignored by binary logging no error is returned if the SQL statement
#       modifies a table stored in a row-only engine.
# ------------------------------------------------------------------
# With binlog_format = STATEMENT :
# 1) Set the default database to a database which is ignored by binary logging.
# 2) Insert data in a table stored in the row-only engine.
# 3) Verify that data was inserted.
#
# TC11. Verify that when binlog_format = STATEMENT and a row is injected then
#       binary logging returns the error `ER_BINLOG_ROW_INJECTION_AND_STMT_MODE`.
# ------------------------------------------------------------------
# With binlog_format = STATEMENT :
# 1) Execute a BINLOG statement which inserts data.
# 2) Verify that error `ER_BINLOG_ROW_INJECTION_AND_STMT_MODE` is returned.
# 3) Verify that no data was inserted.
#
# TC12. Verify that when binlog_format = STATEMENT and the default database is
#       ignored by binary logging no error is returned for row injection.
# ------------------------------------------------------------------
# With binlog_format = STATEMENT :
# 1) Set the default database to a database which is ignored by binary logging.
# 2) Execute a BINLOG statement which inserts data.
# 3) Verify that data was inserted.
#
# TC13. Verify that when binlog_format = STATEMENT and the SQL statement is
#       unsafe then a warning is returned.
# ------------------------------------------------------------------
# With binlog_format = STATEMENT :
# 1) Execute a unsafe SQL statement.
# 2) Verify that warning is returned.
# 3) Verify that data was inserted.
#
# TC14. Verify that when binlog_format = STATEMENT and the default database is
#       ignored by binary logging no warning is returned for an SQL unsafe
#       statement.
# ------------------------------------------------------------------
# With binlog_format = STATEMENT :
# 1) Set the default database to a database which is ignored by binary logging.
# 2) Execute a unsafe statement.
# 3) Verify that no warning is returned.
# 4) Verify that data was inserted.
#
# TC15. Verify that when binlog_format = STATEMENT, a row is injected in the
#       master server having binlog_format = MIXED and the slave server has
#       binlog_format = STATEMENT then binary returns the error
#       `ER_BINLOG_ROW_INJECTION_AND_STMT_MODE`.
# ------------------------------------------------------------------
# With binlog_format = MIXED for the master server and binlog_format = STATEMENT
# for the slave server
# 1) On the master server execute a BINLOG statement which injects a row.
# 2) Verify that on the slave server the error
#    `ER_BINLOG_ROW_INJECTION_AND_STMT_MODE` is returned.
# 3) Verify that no data was inserted in the slave server.
#
# ==== References ====
# BUG#39934: Slave stops for engine that only support row-based logging
# BUG#42829: binlogging enabled for all schemas regardless of binlog-do-db /
# binlog-ignore-db
#
# ==== Related test cases ====
#
# binlog.binlog_unsafe verifies more thoroughly that a warning is
# given for the case when an unsafe statement is executed and
# binlog_format = STATEMENT.
#
# ndb_rpl.ndb_rpl_binlog_format_errors verifies that a binlog error is issued
# if more than one engine is involved in a statement and at least one is doing
# it's own logging (is *self-logging*), which is the case for NDB engine.

# Need debug so that 'SET @@session.debug' works.
--source include/have_debug.inc
# Need example plugin because it is the only statement-only engine.
# Dynamic loading of Example does not work on Windows currently.
--source include/not_windows.inc
--source include/have_example_plugin.inc
# The test changes binlog_format, so there is no reason to run it
# under more than one binlog format.
--source include/have_binlog_format_row.inc
# Disable multi threaded slave since an error in a worker slave leads to an
# upper-level error in the coordinator
--source include/not_mts_slave_parallel_workers.inc
# The test does not support group replication plugin since binlog_format is
# not equal to 'ROW' for some test cases
--source include/not_group_replication_plugin.inc
# The test requires MyISAM engine
--source include/have_myisam.inc
# Test requires GTIDs off
--source include/not_gtid_enabled.inc

--source include/master-slave.inc

--disable_query_log
CALL mtr.add_suppression("Unsafe statement written to the binary log using statement format since binlog_format = STATEMENT");
CALL mtr.add_suppression("Cannot execute statement: impossible to write to binary log");
--enable_query_log

--echo ==== Initialize ====

--echo [on slave]
--source include/rpl_connection_slave.inc

SET @old_binlog_format= @@global.binlog_format;
INSTALL PLUGIN example SONAME 'ha_example.so';

--echo [on master]
--source include/rpl_connection_master.inc

SET @old_binlog_format= @@global.binlog_format;
INSTALL PLUGIN example SONAME 'ha_example.so';

CREATE TABLE t (a VARCHAR(100)) ENGINE = MYISAM;
CREATE TABLE t_row (a VARCHAR(100)) ENGINE = INNODB;
CREATE TABLE t_stmt (a VARCHAR(100)) ENGINE = EXAMPLE;
CREATE TABLE t_slave_stmt (a VARCHAR(100)) ENGINE = MYISAM;
CREATE TABLE t_autoinc (a INT KEY AUTO_INCREMENT) ENGINE = MYISAM;
CREATE TABLE t_double_autoinc (a INT KEY AUTO_INCREMENT) ENGINE = MYISAM;

--eval CREATE TRIGGER trig_autoinc BEFORE INSERT ON t_autoinc FOR EACH ROW BEGIN INSERT INTO t_stmt VALUES ('x'); END
--eval CREATE TRIGGER trig_double_autoinc BEFORE INSERT ON t_double_autoinc FOR EACH ROW BEGIN INSERT INTO t_autoinc VALUES (NULL); END

CREATE DATABASE other;

# This makes the innodb table row-only
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;

--echo [on slave]
--source include/sync_slave_sql_with_master.inc

DROP TABLE t_slave_stmt;
CREATE TABLE t_slave_stmt (a INT) ENGINE = EXAMPLE;

--echo [on master]
--source include/rpl_connection_master.inc

# This is a format description event.  It is needed because any BINLOG
# statement containing a row event must be preceded by a BINLOG
# statement containing a format description event.
BINLOG '
1gRVSg8BAAAAZgAAAGoAAAABAAQANS4xLjM2LWRlYnVnLWxvZwAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAADWBFVKEzgNAAgAEgAEBAQEEgAAUwAEGggAAAAICAgC
';


--echo ==== Test ====

--echo ---- binlog_format='row' ----


--echo * TC1: Modify both row-only and stmt-only table
--eval CREATE TRIGGER trig_2 AFTER INSERT ON t_stmt FOR EACH ROW BEGIN INSERT INTO t_row VALUES(1); END
--error ER_BINLOG_ROW_ENGINE_AND_STMT_ENGINE
INSERT INTO t_stmt VALUES (1);
SELECT * FROM t_stmt /* should be empty */;
SELECT * FROM t_row /* should be empty */;
DROP TRIGGER trig_2;

--echo * TC2: Stmt-only table and binlog_format='row'
--error ER_BINLOG_ROW_MODE_AND_STMT_ENGINE
INSERT INTO t_stmt VALUES (1);
SELECT * FROM t_stmt /* should be empty */;

--echo * TC3: Row injection and stmt-only table: in slave sql thread
INSERT INTO t_slave_stmt VALUES (1);
--echo [on slave]
--source include/rpl_connection_slave.inc
# 1664 = ER_BINLOG_ROW_INJECTION_AND_STMT_ENGINE
--let $slave_sql_errno= 1664
--let $show_slave_sql_error= 1
--source include/wait_for_slave_sql_error_and_skip.inc
--source include/rpl_connection_slave.inc
SELECT * FROM t_slave_stmt /* should be empty */;

--echo [on master]
--source include/rpl_connection_master.inc
--echo * TC4: Row injection and stmt-only table: use BINLOG statement
# This is a Table_map_event and a Write_rows_event. Together, they are
# equivalent to 'INSERT INTO t_stmt VALUES (1)'
--error ER_BINLOG_ROW_INJECTION_AND_STMT_ENGINE
BINLOG '
1gRVShMBAAAALwAAAEABAAAAABcAAAAAAAAABHRlc3QABnRfc3RtdAABDwJkAAE=
1gRVShcBAAAAIAAAAGABAAAQABcAAAAAAAEAAf/+ATE=
';
SELECT * FROM t_stmt /* should be empty */;


--echo ---- binlog_format=mixed ----

--echo [on slave]
--source include/sync_slave_sql_with_master.inc
--source include/stop_slave.inc
SET @@global.binlog_format = MIXED;
--source include/start_slave.inc
--echo [on master]
--source include/rpl_connection_master.inc
SET @@global.binlog_format = MIXED;
SET @@session.binlog_format = MIXED;

--echo * TC5: Unsafe statement and stmt-only engine
--error ER_BINLOG_UNSAFE_AND_STMT_ENGINE
INSERT INTO t_stmt VALUES (UUID());
SELECT * FROM t_stmt; /* should be empty */;

# Concatenate two unsafe values, and then concatenate NULL to
# that so that the result is NULL and we instead use autoinc.
--echo * TC6: Multi-unsafe statement and stmt-only engine
--error ER_BINLOG_UNSAFE_AND_STMT_ENGINE
INSERT INTO t_double_autoinc SELECT CONCAT(UUID(), @@hostname, NULL) FROM mysql.general_log LIMIT 1;
SELECT * FROM t_double_autoinc; /* should be empty */;


--echo ---- binlog_format=statement ----

--echo [on slave]
--source include/sync_slave_sql_with_master.inc
--source include/stop_slave.inc
SET @@global.binlog_format = STATEMENT;
--source include/start_slave.inc
--echo [on master]
--source include/rpl_connection_master.inc
SET @@global.binlog_format = STATEMENT;
SET @@session.binlog_format = STATEMENT;

--echo * TC7: Row-only engine and binlog_format=statement: innodb-specific message
--error ER_BINLOG_STMT_MODE_AND_ROW_ENGINE
INSERT INTO t_row VALUES (1);
SELECT * FROM t_row /* should be empty */;

--echo * TC8: Same statement, but db filtered out - no error
USE other;
INSERT INTO test.t_row VALUES (1);
USE test;
SELECT * FROM t_row /* should contain the value 1 */;
USE other;
DELETE FROM test.t_row;
USE test;

--echo * TC9: Row-only engine and binlog_format=statement: generic message
SET @@session.debug= '+d,no_innodb_binlog_errors';
--error ER_BINLOG_STMT_MODE_AND_ROW_ENGINE
INSERT INTO t_row VALUES (1);
SELECT * FROM t_row /* should be empty */;

--echo * TC10: Same statement, but db filtered out - no error
USE other;
INSERT INTO test.t_row VALUES (1);
USE test;
SET @@session.debug= '';
SELECT * FROM t_row /* should contain the value 1 */;

--echo * TC11: Row injection and binlog_format=statement: BINLOG statement
# This is a Table_map_event and a Write_rows_event. Together, they are
# equivalent to 'INSERT INTO t VALUES (1)'.
--error ER_BINLOG_ROW_INJECTION_AND_STMT_MODE
BINLOG '
cNpVShMBAAAAKgAAADYBAAAAABcAAAAAAAAABHRlc3QAAXQAAQ8CZAAB
cNpVShcBAAAAIAAAAFYBAAAQABcAAAAAAAEAAf/+ATE=
';
SELECT * FROM t /* should be empty */;

--echo * TC12: Same statement, but db filtered out - no error
# This is a Table_map_event and a Write_rows_event. Together, they are
# equivalent to 'INSERT INTO t VALUES (1)'.
USE other;
BINLOG '
cNpVShMBAAAAKgAAADYBAAAAABcAAAAAAAAABHRlc3QAAXQAAQ8CZAAB
cNpVShcBAAAAIAAAAFYBAAAQABcAAAAAAAEAAf/+ATE=
';
USE test;
SELECT * FROM t /* should contain the value 1 */;
DELETE FROM t;

--echo * TC13: Unsafe statement and binlog_format=statement
# This will give a warning.
INSERT INTO t VALUES (COALESCE(1, UUID()));
SELECT * FROM t /* should contain the value 1 */;
DELETE FROM t;

--echo * TC14: Same statement, but db filtered out - no message
USE other;
INSERT INTO test.t VALUES (COALESCE(1, UUID()));
USE test;
SELECT * FROM t /* should contain the value 1 */;
DELETE FROM t;


--echo ---- master: binlog_format=mixed, slave: binlog_format=statement ----

SET @@global.binlog_format = MIXED;
SET @@session.binlog_format = MIXED;

--echo * TC15: Row injection and binlog_format=statement: in slave sql thread
INSERT INTO t VALUES (COALESCE(1, UUID()));
--echo [on slave]
--source include/rpl_connection_slave.inc
# 1666 = ER_BINLOG_ROW_INJECTION_AND_STMT_MODE
--let $slave_sql_errno= 1666
--let $show_sql_error= 1
--source include/wait_for_slave_sql_error_and_skip.inc
--source include/rpl_connection_slave.inc
SELECT * FROM t /* should be empty */;
--echo [on master]
--source include/rpl_connection_master.inc


--echo ==== Clean up ====

DROP TRIGGER trig_autoinc;
DROP TRIGGER trig_double_autoinc;
DROP TABLE t, t_row, t_stmt, t_slave_stmt, t_autoinc, t_double_autoinc;
DROP DATABASE other;
SET @@global.binlog_format = @old_binlog_format;
SET @@session.binlog_format = @old_binlog_format;
UNINSTALL PLUGIN example;
--echo [on slave]
--source include/sync_slave_sql_with_master.inc
--source include/stop_slave.inc
SET @@global.binlog_format = @old_binlog_format;
SET @@session.binlog_format = @old_binlog_format;
--source include/start_slave.inc
UNINSTALL PLUGIN example;

--source include/rpl_end.inc